HOW TO OPERATE THE MULTIPRO® MIDGATE

To operate the MultiPro Midgate, the vehicle must be in PARK with the doors unlocked or have a key fob within 3 feet (1 m) of the vehicle.

Lowering the Midgate:

1. Secure the second-row seat belt buckles to the opening slot in the door trim.

2. Fold the rear seats.

• The front seats might have to be moved forward slightly to allow the rear seats to fold all the way.

3. Stand outside of the vehicle and hold the midgate securely so it does not fall forward.

• The midgate will be heavy and will require some effort to lift and close.

4. Locate the button at the bottom of the midgate (there is one on each side).

5. Press either button to open the larger door of the midgate (the 60-pass-through door).

6. Press either button a second time to open the smaller door if the large door is already open.

7. If the glass is stowed, pressing either button once will open the entire midgate.

Raising the Midgate:

1. Secure the second-row seat belt buckles to the opening slot in the door trim.

2. Raise the midgate with a motion firm enough to engage the latches. Make sure it closes properly.

• The midgate will be heavy and will require some effort to lift and close.

3. If the rear glass is removed, replace it using the directions for Reinstalling the Rear Glass.

4. Once the glass is reinstalled and the midgate is securely latched, raise the seats, and release the seat belt buckles from the slot in the door trim.